GLASS CLEANING ROBOT SRG3

The SRG3 Window Cleaning Robot is a smart automatic glass cleaning robot designed for windows, glass doors, mirrors, office partitions, showroom glass, and other smooth glass surfaces. It sticks to the glass using strong suction and cleans the surface with a microfiber cleaning pad.

The SRG3 uses strong suction power to hold itself firmly on the glass surface. Once the robot is powered on and placed properly, the suction system grips the glass and allows the robot to move safely while cleaning.

Yes, SRG3 comes with important safety features such as strong suction, smart edge detection, anti-fall protection, and a safety rope. For high-rise windows or outside glass, always attach the safety rope properly before starting the robot.

SRG3 includes a safety backup system that helps the robot stay attached for a limited time during a power cut. This gives you time to safely remove the robot from the glass. The safety rope gives extra protection in case suction becomes weak.

Yes, SRG3 is designed with smart edge detection, which helps it detect glass edges and change direction. For frameless glass, always use the safety rope and supervise the robot during cleaning.

Yes, SRG3 can be used on smooth glass surfaces such as glass windows, glass doors, mirrors, balcony glass, office partitions, showroom glass, and bathroom glass. It works best on flat and smooth surfaces where suction can hold properly.

Yes, SRG3 is designed for corner and edge cleaning. Its microfiber cleaning pad helps clean near the edges and corners of the glass. For very tight corners or heavy dirt buildup, a small manual touch-up may sometimes be needed.

Yes, SRG3 comes with a Triple Mist Spray system. The spray helps loosen dust, fingerprints, and light stains so the microfiber pad can clean the glass more effectively.

You can use clean water or a suitable glass cleaning solution as recommended. Avoid thick, sticky, oily, or strong chemical liquids because they can block the spray nozzle or damage the internal parts of the robot.

For very dusty glass, first run SRG3 with a dry microfiber pad to remove loose dust. After that, use the mist spray cleaning mode for better finishing. This helps reduce streaks and prevents dust from spreading on the glass.

SRG3 is best for regular glass cleaning, dust, fingerprints, light stains, and daily maintenance. Very hard stains like paint, cement spots, old watermarks, or heavy bird droppings may need manual pre-cleaning before using the robot.

Yes, the SRG3 microfiber cleaning pad is washable and reusable. After cleaning, remove the pad, wash it properly, dry it completely, and then use it again for the next cleaning session.

For best results, clean the microfiber pad after every use. If the pad becomes very dirty during cleaning, replace it with a clean pad before continuing. A dirty pad can leave marks or reduce cleaning performance.

Yes, supervision is recommended while using SRG3, especially on high-rise windows, outside glass, frameless glass, or very dirty surfaces. The robot works automatically, but you should stay nearby for safety and better control.

SRG3 reduces manual effort and makes glass cleaning easier, safer, and more convenient. It is especially useful for large windows, balcony glass, office partitions, showroom glass, and hard-to-reach areas where manual cleaning is difficult or risky.